Sub-categories

Sold Out
VFC V2 Cut off Lever
Designed for use with the Version II Gearbox
$9.95
Sold Out
VFC M4 AEG Competition Trigger BK
- Flat type trigger with serrated texture- Suitable for Ver. 2 compatible M4 AEG
$24.95
Sold Out
VFC ECS Avalon Gearbox (V2 / M4)
The VFC Avalon ECS M4 Complete Gearbox.  M4 Avalon AEG style fits in all the VR16 Avalon guns by Elite Force.  A fully built and ready to the drop-in gearbox with all its parts ready to go.  Fits airsoft M4...
$199.95
Sold Out
Tienly Super Rotary AEG Bearing Spring Guide (V2 / V3)
Tienly bearing spring guides feature high-quality ball bearings which allow the spring to rotate during compression and release freely. This alleviates binding of the spring and alleviates torsional strains on the spring - leading to more consistent FPS. The inherent thickness...
$19.95
Sold Out
Tienly GT25000 Ultra High Torque Motor (Long Axle / Short Axle)
The new product of 2017! 25000RPM at 7.4v Lipo with Zero Load. 22TPA Armature and neo-Magnet. Extremely High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Optimized Power Efficiency. Allows you to get more shots out of same battery. Hand...
$89.95
Tienly GT-45000 Ultra High Performance Motor (Long Axle / Short Axle)
Neo-Magnet. Extremely High Speed for High Ratio gear. (Not designed for Hi-Speed Gear set, check out GT25000 or GT30000 Hi-Torque Motors). Hand wound motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves...
$94.95
Tienly GT-35000 Ultra Torque Motor (Long Axle / Short Axle)
16TPA Armature and neo-Magnet. High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Handmade motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves trigger response and rate of fire, suitable for springs...
$89.95
Sold Out
Tienly GT-30000 Ultra Torque Motor (Long Axle / Short Axle)
18TPA Armature and neo-Magnet. High Torque for any high-speed gear sets(10.44:1 Siegetek Friendly). Hand wound motor using the best materials, well balanced and energy efficient, side air vents provide maximum cooling efficiency.Improves trigger response and rate of fire, suitable for...
$89.95
Sold Out
Tactical Crusader Comptetition Trigger (Black / Red)
Upgrade trigger for you TM /VFC Spec M4 AEGs. Flat Design.
$24.95
Siegetek TM Next Gen recoil shock Gear (20:1) (O Pinion Gear Included)
This is a COMPLETE single-sector high-speed gearset from Siegetek Concepts for those looking for an indestructible set of gears to power their high-speed setup. All components are CNC machined from one-piece chromium molybdenum steel rods and case hardened, offering superior...
$264.95
Siegetek Revolution High-speed Gearset (10.44:1 /14.09:1) (w/ Pinion Gear)
("O" Pinion Gear Included) 4 gears in total. Siegetek gears are the best gears on the market. Period. Barring extreme user error, they are pretty much indestructible. We've installed hundreds of sets without a single failure. All components are CNC...
$264.95
Siegetek Revolution High Torque Gearset (20.8:1 /26.67:1) (w/ Pinion Gear)
("O" Pinion Gear Included) 4 gears in total. Siegetek gears are the best gears on the market. Period. Barring extreme user error, they are pretty much indestructible. We've installed hundreds of sets without a single failure. All components are CNC machined...
$264.95
SHS/RA/ACE1ARMS CNC Aluminum Cylinder Head (V2/V3/G36)
CNC machined aluminum cylinder head with face machined for rubber impact washer. Rubber washer can be removed for sorbo pad installation. Double O-ring design ensures a tight seal against the cylinder.
$12.95
SHS/RA Selector Plate (M4/AK)
This is an upgrade nylon selector plate for AEG rifles. It also features the electrical plates so that it is compatible with most brands.
$7.95
SHS/RA Meteorite Steel Bushings Set (6mm/7mm/8mm/9mm)
Heat treated steel ensures that these will not break on you. Bearings will reduce friction but they will fail under stress. We use solid steel bushings on all of our high end builds to ensure reliability. Part:8mm steel bushings Application: Ver.2 /...
$14.95
SHS/RA High Torque Motor (Long Axle / Short Axle)
*Motor colour may differ between batches. Internals are all the same.* Balanced armature winding with strong neodymium magnets,18 TPA. Made for a lot of power! Use with 350+ fps AEGs.
$49.95
SHS/RA AEG Super Lightweight 14 Teeth Piston
NEW model with improved teeth quality and tolerances.  Made of high grade polymer with a full steel tooth rack. Skeletonized piston body for extreme light weight, great for high speed setups.
from $14.95
SHS/RA AEG Shim Set
Steel shim set for AEG. 
$4.95
SHS/RA AEG M4 Nozzle (w/ O-ring)
7075 CNC Aluminium construction. Double o rings design for best air seal and helping centerlizing the nozzle. (Colour may vary)
$7.95
SHS/RA AEG G36 Nozzle (w/ O-ring)
7075 CNC Aluminium construction. Double o rings design for best air seal and helping centerlizing the nozzle.
$7.95
Sold Out
SHS AEG Motor Pinion Gear (O Shape / D Shape)
Harden Steel Construction.  
$4.95
SHS AEG AK Nozzle (Long) (w/ O-ring)
7075 CNC aluminium Construction. Dual O rings for best air seal and helping centralizing nozzle on cylinder head.
$7.95

Showing: 1 - 24 of 81

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top